Gig Harbor Auto Repair

You know how heavy your engine and transmission are, so you can imagine how tough the parts that hold them onto your vehicle's sub-frame must be.  Not only must they support the weight, they also have to isolate vibrations and noise from the passenger cabin.  Pretty tall order, wouldn't you say? The parts that face that task daily are called the motor mounts, or engine mounts.  They are usually made of rubber with steel brackets.  Others contain a liquid for vibration and sound isolation.  Most vehicles have three or four motor mounts, and while rubber or hydraulic liquids do a good job of damping the vibrations from the engine, they also have their limitations.  The problem with rubber is that it gets old and brittle.  Plus, if there's an oil leak anywhere in your engine and oil gets on the rubber motor mounts, rubber will deteriorate even more quickly.  As for the liquid motor mounts, they can develop leaks and stop working.  Here are sign ... read more

Just like your skin can burn from too much sun, so can the paint on your vehicle.  It can turn dull, oxidize and fade the more ultraviolet rays beat down on it. One solution is to park in a shady spot, or you can buy a cover for your vehicle and put it on when you know it's going to be sitting in the sun for awhile. Yes, it takes a couple of minutes to put on, but in the end, keeping the gloss on your paint will help it retain its beauty… and its value. And it's not just the sun that can damage your vehicle's paint.  Grit, bird droppings, sap, dust and dead bugs can all ruin the paint.  So, keep your vehicle clean.  Wash it with a soap made especially for vehicles. Dry it with special towels that won't scratch your paint.  Remember:  DON'T WASH YOUR VEHICLE IN THE SUN. Once your vehicle is washed, protect the paint even further with a coat of wax.  DON'T WAX YOUR VEHICLE IN THE SUN, EITHER. Don't forget the vehicle's interior.  Plastic com ... read more

If you've ever gotten in an unfamiliar vehicle, maybe a rental car, you may have pulled up to the gas pump and wondered, "Which side is the fuel filler on?" Here's a tip for you.  There is usually a little arrow on the instrument panel near the fuel gauge that points to the side where the fuel filler is.  But why are the fuel fillers not all on the same side, anyway? There are lots of reasons.  At one time, many manufacturers tried putting them in an easy-to-reach spot: in the center of the vehicle's rear end.  Some even hid them behind a hinged license plate door.  Cool place, but it turned out not to be a good idea.  When a vehicle with a fuel filler in the rear was hit by another vehicle from behind, it was much more prone to catch fire and explode. Safety regulations now dictate that the fuel filler doors be placed within crumple zones and away from where they can drip fuel on hot exhaust pipes or near electrical connections.  But why do manufactu ... read more

When the weather gets colder, sometimes the noises your vehicle makes will change.  For example, you may notice a whining sound when you get going in the morning.  It may go away when the vehicle warms up, but it's best not to ignore that sound because it could be a warning of worse things to come. Colder temperatures cause different components to behave differently.  Let's take a look at a few of them.  First, the fluids in your vehicle.  Cold temperatures can make them behave a little differently, such as engine oil, transmission fluid and power steering fluid. Those characteristics could change if the fluids are older and full of contaminants. Belts also can create a whining noise when cold.  Since they turn pulleys that move other things, several factors can create issues.  Increased friction can change proper tensions on belts.  Plus, belts change as they age and may crack, get loose or develop a glazed surface. Belts and pulleys also must b ... read more

Most would agree they'd rather drive around in a clean, shiny vehicle than one coated with a layer of dirt.  When warmer weather comes around, some of us are bound and determined to wash our own vehicles.  And to protect the paint and its luster, there are a few things to keep in mind when you get out the bucket and soap. Cool body.  It's not a good idea to wash a vehicle when the body is hot.  If it's been sitting out in the sun or you've been riding around on a sunny day, make sure you cool your vehicle off by either moving it to the shade or wetting it down with cool water. The problem with washing a hot vehicle is that it's going to dry so fast, minerals in the water can form hard-to-remove spots on the paint.  And some of those can be really difficult to get out.  Best to avoid it. Slippery when wet.  Make sure you wet your vehicle down thoroughly before you get the washing mitt out.  Experts keep a couple of buckets of soapy water on hand ... read more

We've all been through it. The vehicle ahead of us kicks up mud, slush, snow or salt on our windshield and we can't see a thing.  And not being able to see a thing when we're driving?  Not a good thing. Debris on a vehicle's glass can be blinding when driving directly into the sun.  And other things can ruin visibility: scratches on the glass, fogged windows, mineral deposits.  So lets make one thing clear:  Your windows.  Here are some tips. Number one rule, don't use abrasives on glass. That means no gritty cleaners that are made for metal.  Avoid at all costs those dark green abrasive pads on some kitchen sponges that are made to clean metal pots and pans UNLESS the manufacturer specifically says they can be used on glass. Use the appropriate cleaner for the substance that's being cleaned off. Special automotive glass cleaners are available, and your Mackert Automotive LLC service advisor can make recommendations. Vinegar can work wonders. Sometim ... read more